Lets just say this system works for two weeks straight, the point is it will cease. Roulette is constant at change, therefore, if one uses a so called powerful “system”, and this system never fails with no change in methods, then that means Roulette never changes. You have to change as Roulette changes. “Lots of systems work, but not for very long….”

Wow! That’s great, congratulations. I’ll definitely try it out.

Brand new systems on the following website…well worth checking them out. Keeping up with the game of roulette

http://www.roulettemoneyonline.com

check it out and you guys n gal’s tell me what you think.

Thanks.

DO YOU GET PAID EVERY TIME A FOOL RESPONDS?
I WISH YOU WOULD EXPLODE INTO FLAMES YOU SPAMMER.

Only saying check it out and see what you think, I’m not claimin it’s a bunch of fail safe systems. Proven to help you and increase your chances of winning and eliminating the chance of loss. I use a few of these systems and i’ve mix and matched to make my own kind of system and i’m pretty damn successful with it. I paid for my car insurance from my winning this month £1000. I can’t make you beleive anything so it’s for people to make thier own assumptions. I’d appriciate it if you stopped claiming me to be a spammer I’m trying to help people succeed in roulette.

Thanks.

If you weren’t before you are now a fantasy pusher.
Your short term success can cost others a lot of $.
Keep it to yourself, Mother Teresa.

Hi,
I have tested three systems that clocks the ball against wheel. they are not reliable. the producer gave 35% edge but in fact you can’t get more that 7-8%...if you go for long run you may win something but casinos moves the wheels arround so you may never know where is your wheel you have the tool calibrated for…then you lose your bankroll very fast as takes time for you to understand different wheel…doing this too often you may become suspicious for casino staff…you need someone from inside to tell you where is your wheel positioned….many details are not presented on forums….
so guys, take care when applying any system…if anyone would work, they will come up with contrameasure imediately..if no contrameasure available they will shut down the bussines…do you guys can imagine such a scenario?

Why not simply use a software called roulette detective to test methods and systems. You just load your collections of spins into it, print out the results and check to see if your systems works or not. There is no need to waste money placing experimenting bets. Google it.

Software is a problem sir. The reason is nothing can duplicate real chance. Software systematically produces events by simply making selections from a shuffle of one billion hands(spins). A real table does not shuffle, select, choose, decide, think or compromise. 100% pure chance resides only at a real table. Guess what, just because a method fails against RNG(online Roulette or any form of electronic Roulette) doesn’t mean it will fail at a real table. RNG was designed to take money because it is flawed. The RNG chance ratio is altered( read my threads). We all been to a Carnival, right? Most of us shot the basket ball to win that huge stuffed animal. We always wondered why we could not make a single shot; we said to our self, ” I no I am not a professional Basket Ball player, but I should have made at least one shot”. First of all, the rim is oval shaped; the ball has to be perfectly tossed at a certain angle to go in. One visitor will get lucky enough to make that shot, and if so, that person might never make it again. A real Roulette table is like a real Basket Ball Rim; there is a real chance. Don’t let online Roulette(practice mode) fool you. Software can be tampered with at “WILL”, never forget that. Which ever way you choose to play, have fun and good luck.
                                                            DSLEEP, 28, Vicksburg, MS

“DO YOU GET PAID EVERY TIME A FOOL RESPONDS?
I WISH YOU WOULD EXPLODE INTO FLAMES YOU SPAMMER” >>> I agree!  Ken

drakau - 22 August 2010 11:16 AM

Hi,
I have tested three systems that clocks the ball against wheel. they are not reliable. the producer gave 35% edge but in fact you can’t get more that 7-8%...if you go for long run you may win something but casinos moves the wheels arround so you may never know where is your wheel you have the tool calibrated for…then you lose your bankroll very fast as takes time for you to understand different wheel…doing this too often you may become suspicious for casino staff…you need someone from inside to tell you where is your wheel positioned….many details are not presented on forums….
so guys, take care when applying any system…if anyone would work, they will come up with contrameasure imediately..if no contrameasure available they will shut down the bussines…do you guys can imagine such a scenario?

If you are referring to vb, yes you are correct. Wheels do get moved. It is pretty easy though to recognise a wheel by markings on it. If it was moved you would have to make sure that you still have a dominant drop. If you don’t then you can write that wheel off (for now anyway) It is quite funny though how I have been playing one specific wheel that has been serviced, moved and been leveled several times and yet the same dominant drop is still there. Why you ask? Well I can tell you now that the track is imperfect. causing the ball to veer off and hit the same vertical diamond time and again. So there are various reasons why a wheel might be tilted or stay tilted for that matter. 99% of wheels have inperfections. Everything is mechanical and mechanical contraptions fail.

It is pretty scary though to read about how you tested 3 systems and then tried to apply them and that was it. You don’t say what the systems are and what kind of homework you did. For instance. Did you by any chance keep a scatter chart and play the peaks? You see, even if your prediction of Strike number is very good but you don’t allow for the sweet spot in scatter it will fail or give you less of an advantage at least. If it is vb you are referring to and I believe it is, before you even start playing a wheel you need to investigate that wheel for quite a few spins. You look for scatter consistancy (scatter chart). You look for tilt. You look for consistancy in drop off point of the ball after the correct prediction revolution. If this varies you know that although the same diamond get’s hit predominantly the wheel might not be tilted. Reason being that if it was 6 revolutions out and you predict but it now travels an extra revolution your prediction will be wrong.

So I’m afraid there is no quick fix or quick walk in and play in vb (except if a wheel has been found and properly looked at and conditions stay the same) In time you will havea couple of wheels which is playable almost at all times.

Hope this helps.

Well, i have no interest in advertising what systems i have played. I’ll just explain some details: two of them has built in scatter chart and tunes automaticaly the output based on an average of minimum 70 spins. All three systems exploits drop zone and one producer claims that his crap works even with leveled wheels which is obviously crap. I have to mention that i have worked with casinos so moving wheels arrond has different rules now, they are looking for signs made by players, so forget about this old school method.
You are right about drop zone, even with service the drop persists due materials it is built from (the wheels)...they couldn’t design a perfect wheel yet but newer models are hard to beat anyway, not imposible….

I’m not referring to making marks on wheels. There are always a ding or a scratch or some wear and tear marks on wheels. My favourite wheel has two wear and tear marks (through the veneer) on the both sides of the dominant diamond. Marks like that cannot be removed except if the wheel is removed and refurbished. Something casinos will not do unless the wheel starts loosing money. As long as it wins it stays.

Your method with built in scatter sounds like a scam. Also the matter of VB on level wheel is nonsense. The only level vb system I know of is E2. Tilted or semi-tilted wheels are much more profitable though.

Hi,

this part is the only real and workable option these tools contains. It is based on inputing the numbers for ~70 spins even more, afterwards the program charts them and find out what is the most suitable number of pockets your prediction should be calculated with. That is it, nothing more…anyone can do this with excel sheet very simple, agree? It is only an aid for not calculating in your mind the scatter… I have never tried VB, can you offer some usefull info?

I am not a stingy person. Yet you would have to agree and respect the fact that I would not reveal VB methods on public forums.

What I can tell you is you need a tilted or semi-tilted wheel.
You need to have managable scatter. (Differs from wheel to wheel, also what ball is used? What is the ball made of and what is the size)
Looking at the above you would have to track for a scatter chart.
The system itself. You need to clock the rotor. You need to have a specific ball speed at a specific time. You will calculate using Target number, Strike number and result. More I do not want to reveal in public.

As far as your scatter software. I assume you take into account where the ball actually hits the rotor (Strike number) and where it ends up (Result) The difference being your scatter. So you would of tracked two sets of numbers correct?

If this was not done then I’m thinking the software was more for finding bias. BUT 70 odd spins is hopeless as a sample. You need 3000 spins. If the sofware is for bias searching, then 3000 spins will show you whether the wheel is bias and whether it is playable or not.